| Function: | Flow Control |
|---|---|
| Installation: | Cover Plate |
| Drive: | Hydraulic |
| Samples: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier 4/3-, 4/2- or 3/2-way version
Porting pattern according to ISO 4401-03-02-0-05 (with
or without locating hole) and NFPA T3.5.1 R2-2002 D03
High-power solenoid, optionally rotatable by 90°
Electrical connection as individual or central connection
Manual override, optional
Spool position monitoring, optional
CE conformity according to the Low-Voltage Directive
2014/35/EU for electrical voltages > 50 VAC or
> 75 VDC
Solenoid coil as approved component with UR marking
according to UL 906, edition 1982, optional
Approval according to C22.2 No. 139-1982, optional
The directional valves of type WE are solenoid-actuated directional spool valves that can be used as electro-magnetic component. They control start, stop and direction of a flow. The directional valves basically consist of the housing (1), one or two electronic solenoids (2), the control spool (3), and the return springs (4). In the de-energized condition, the control spool (3) is held in the central position or in the initial position by the return springs (4) (except for version "O"). If the wet-pin electronic solenoid (2) is supplied with power, the control spool (3) moves out of its rest position into the required end position. In this way, the required direction of flow according to the selected symbol is released. After the electronic solenoid (2) has been switched off, the control spool (3) is pushed back into its central position or into its initial position (except for valves with "OF" detent and valves without type "O" spring). A manual override (5) allows for the manual switching of the valve without solenoid energization. For unobjectionable functioning, the hydraulic system has to be bled properly. |
|
|
|
|
|
| Quantity(pieces) | 1 - 5 | >5 |
| Lead time (days) | 10 | To be negotiated |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}