| Media: | Oil |
|---|---|
| Temperature: | Ordinary Temperature |
| Actuator: | Pneumatic |
| Connection Form: | Clamp |
| Type: | Distribution of Direct Acting |
| Material: | Cast Iron |
| Samples: |
|---|
Suppliers with verified business licenses
Audited Supplier 4/3-, 4/2- or 3/2-way version Porting pattern according to ISO 4401-03-02-0-05 (with or without locating hole) High-power solenoid, optionally rotatable by 90° Electric connection as single or central connection Optional auxiliary operating device Spool position monitoring, optional CE conformity according to the Low-Voltage Directive 2014/35/EU for electrical voltages >50 VAC or >75VDC Solenoid coil as approved component with UR marking according to UL 906, edition 1982, optional Approval according to C22.2 no. 139-1982, optional
| Material | R900550589 |
| Division | Industrial Hydraulics |
| repairlink | /repair/IH/Q/R900550589 |
| Shipping height | 90 mm |
| Shipping length | 146 mm |
| Shipping weight estimated | 1.52 kg |
| Shipping width | 45 mm |
| Datasheet name | RE23178 |
| Electrical connection | at the terminal box, with th.& |
| Manuall override unit | with concealed manual override |
| Model Code | 4WE 6 D6X/EG24N9DAL |
| Seal material | NBR seals |
| Series | 6x |
| Size | 6 |
| Special Version | - |
| Spool feedback | with spring return |
| Spool position monitoring | without position switch |
| Spool type | D -spool |
| Voltage | 24 V DC |
Directional valves type WE are solenoid-operated directional spool valves and can be used as electromagnetic components. They control the start, stop and direction of a flow.
The directional valves essentially consist of the housing (1), one or two electromagnets (2), the control spool (3) and the return springs (4).
In the de-energized state, the control spool (3) is held in the middle or initial position by the return springs (4) (except version "O").
When the electromagnet (2) switching in oil is energized, the control spool (3) moves from its rest position to the desired end position. This releases the required flow direction according to the selected symbol.
After switching off the electromagnet (2), the control spool (3) is pushed back to the middle or initial position (except for valve with detent "OF" and valve without spring type "O").
An auxiliary actuation (5) enables the valve to be switched manually without magnet supply.
The hydraulic system must be properly vented to ensure proper function.
Without spring return "O" (only possible with symbols A, C and D)
This version is a directional valve with two switching positions and two electromagnets without detent. The valve without spring return on the control spool (3) has no defined basic position when de-energized.
Without spring return with detent "OF" (only possible for symbols A, C and D)
This version is a directional valve with two switching positions and two electromagnets with detent. The control spool (3) is fixed in the respective switching position by the detents. During operation, the permanent current supply to the electromagnet can thus be omitted, which contributes to energy-efficient operation.
|
Size |
6 | ||
|
Weight |
Valve with one solenoid |
kg |
1.45 |
|
Valve with two solenoids |
kg |
1.95 | |
|
Installation position |
any | ||
|
Ambient temperature range |
NBR seals |
°C |
-20 … +50 |
|
FKM seals |
°C |
-15 … +50 | |
|
Version for HFC hydraulic fluid |
°C |
-20 … +50 | |
|
Low-temperature version 1) |
°C |
-40 … +50 | |
|
Storage temperature range |
°C |
+5 … +40 | |
|
MTTFD values according to EN ISO 13849 2) |
Years |
300 | |
| 1) | For the use at low temperatures, see Project planning information |
| 2) | For further details, see data sheet 08012 |
 |
|
|
|
|
|
| Quantity(pieces) | 1 - 5 | >5 |
| Lead time (days) | 10 | To be negotiated |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}